Yeonju<br><br>Yes that your board is similar is very helpful.<br><br>If you can then e-mail me your current scripts I can use the board that I have to try and find your problem and correct it so your board runs. <br><br>It is very important that you tell me in what way your board is not like mine so that I don't send you code which tries to use hardware not to be found on your board. <br>
<br><br>Prince<br><br><div class="gmail_quote">On Thu, Dec 4, 2008 at 12:57 PM, Yeonju <span dir="ltr"><<a href="mailto:xelis@hufs.ac.kr">xelis@hufs.ac.kr</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>
Hi, Prince.<br>
<br>
Yes. My board spec is similar to this spec.<br>
<br>
Regards,<br>
-Yeonju<br>
<div><div></div><div class="Wj3C7c"><br>
<br>
PrinceR wrote:<br>
><br>
> Yeonju,<br>
><br>
> Can you confirm that your board is similar to the board spec listed here<br>
> below:<br>
><br>
> • 3 x 4 inch Single Board Computer<br>
> • 8 channel 10 bit ADC (Max 500K SPS)<br>
> • 400 MHz Samsung S3C2440A Processor<br>
> • 130 bit GPIO and 24 channel external interrupt<br>
> • ARM 920T core with Cache (16K+16K) and MMU<br>
> source<br>
> • 64MB SDRAM<br>
> • Camera interface<br>
> • 32 NAND Flash memory<br>
> • 10Mbps Ethernet<br>
> • AC'97 CODEC interface<br>
> • PWM timers, Real Time Clock and Watch Dog<br>
> • Touch Screen Interface<br>
> Timer<br>
> • LCD Controller (TFT)<br>
> • Built-in Speaker<br>
> • CF/MMC/SD Host<br>
> • JTAG Debug port<br>
> • USB Host(OHCI) and Device<br>
> • Screen size up to 640 x 480<br>
> • UART, IrDA, DMA, I2C, I2S interface<br>
> Prince Riley<br>
><br>
><br>
> On Wed, Dec 3, 2008 at 9:09 PM, Yeonju <<a href="mailto:xelis@hufs.ac.kr">xelis@hufs.ac.kr</a>> wrote:<br>
><br>
>><br>
>> Hi-.<br>
>><br>
>> I misunderstand your message.<br>
>> I think that you suggest me to repost dumped physical memory using KDB.<br>
>><br>
>> This is my build command line,<br>
>><br>
>> [root@localhost okl4_2.1]# ./tools/build.py machine=gta01 project=l4test<br>
>><br>
>> and I also used command option "mutex_type=user".<br>
>><br>
>> [root@localhost okl4_2.1]# ./tools/build.py machine=gta01 project=l4test<br>
>> mutex_type=user<br>
>><br>
>> I use okl4 2.1 (not fixed.7) and Fedora6.<br>
>> My target board is MBA2440 based on s3C2440.<br>
>><br>
>> I wonder I understand your message correctly.<br>
>><br>
>> Regards,<br>
>><br>
>><br>
>><br>
>><br>
>> Geoffrey Lee wrote:<br>
>> ><br>
>> > On Tue, Dec 02, 2008 at 07:50:20PM -0800, Yeonju wrote:<br>
>> >><br>
>> >> Hi-.<br>
>> >><br>
>> >> I'm sorry to confuse you. And thank you for your help.<br>
>> >> I'm not so good at English....T-T<br>
>> >><br>
>> >> I built without "mutex_type=user" at first, but it didn't work. So I<br>
>> >> searched this forum for clue.<br>
>> >> And I found a topic "S3C2440A and okl4". In that topic, you advised to<br>
>> >> buid<br>
>> >> with "mutex_type=user".<br>
>> >> After I read that, I built with "muetex_type=user". But it also didn't<br>
>> >> work.<br>
>> >><br>
>> >> I still find a soultion. Please help me.<br>
>> ><br>
>> ><br>
>> > Just so that I understand your problem correctly, could you please<br>
>> > re-post the exact build command line that you used to build your<br>
>> > image, as well as the resulting output? In addition, are you<br>
>> > running this on hardware or simulator?<br>
>> ><br>
>> ><br>
>> >><br>
>> >> Regards,<br>
>> >><br>
>> ><br>
>> > -gl<br>
>> ><br>
>> >><br>
>> >><br>
>> >> Geoffrey Lee wrote:<br>
>> >> ><br>
>> >> > On Tue, Dec 02, 2008 at 05:34:35PM -0800, Yeonju wrote:<br>
>> >> >><br>
>> >> >> Hi~.<br>
>> >> ><br>
>> >> ><br>
>> >> > Hi - to make sure I understand correctly, do you mean that<br>
>> >> > if you build with mutex_type=user, then l4test will run<br>
>> >> > successfully to completion? Please note that l4test<br>
>> >> > must be run with mutex_type=user, if you run it under<br>
>> >> > a different configuration it may not work.<br>
>> >> ><br>
>> >> > -gl<br>
>> >> ><br>
>> >> >><br>
>> >> >> I have a question about 'l4test'.<br>
>> >> >> I succeeded to run example in okl4_2.1/iguana on s3c2440 (ARM920T).<br>
>> >> >> So, I've tried running 'l4test'(in okl4_2.1/l4test), but I failed.<br>
>> >> >><br>
>> >> >> I buit 'l4test' like this.<br>
>> >> >><br>
>> >> >> &gt;./tools/build.py machine=gta01 project=l4test<br>
>> >> >> Binary image was made successful.<br>
>> >> >> But, after load that image on board, I&nbsp; saw &nbsp;fourth case.<br>
>> >> >> Fisrt case is "Nothing happen".<br>
>> >> >> There is only one message.<br>
>> >> >><br>
>> >> >> OKL4 - (provider: Open Kernel Labs) built on Dec 4 2008 07:55:18<br>
>> using<br>
>> >> >> gcc<br>
>> >> >> ver.<br>
>> >> >> Second case is "L4_Rootserver abort".<br>
>> >> >><br>
>> >> >> OKL4 - (provider: Open Kernel Labs) built on Dec 4 2008 07:55:18<br>
>> using<br>
>> >> >> gcc<br>
>> >> >> ver.<br>
>> >> >> bootinfo: max space = 256, mac mutex = 256, phys [0x30700000,<br>
>> >> 0x33ffffff)<br>
>> >> >> Thread Delete failed, ErrorCode = 2<br>
>> >> >> Assertion failed: r ==1, function deleteThread, file<br>
>> >> >> l4test/src/utility.c,<br>
>> >> >> lin.<br>
>> >> >> -KD# User: L4_Rootserver abort()ed-<br>
>> >> >> &gt;<br>
>> >> >> Third case is "Roottask pagefault"<br>
>> >> >><br>
>> >> >> OKL4 - (provider: Open Kernel Labs) built on Dec 4 2008 07:55:18<br>
>> using<br>
>> >> >> gcc<br>
>> >> >> ver.<br>
>> >> >> bootinfo: max space = 256, mac mutex = 256, phys [0x30700000,<br>
>> >> 0x33ffffff)<br>
>> >> >> roottask read pagefault at 00bae664, ip=0012a5a0 - deny<br>
>> >> >> -KD# roottask pagefault-<br>
>> >> >> &gt;<br>
>> >> >> Fourth case is "success".<br>
>> >> >> All l4test suite was success.<br>
>> >> >> I fixed console.cc(in platform/s3c2410/pistachip/kdb), traps.spp(in<br>
>> >> >> /arch/arm/pistachio/v5/src) and machine.py(in /arch/arm/tools) for<br>
>> >> >> s3c2440.<br>
>> >> >> And also I tried to build 'l4test' like this.<br>
>> >> >><br>
>> >> >> &gt;./tools/build.py machine=gta01 project=l4test mutex_type=user<br>
>> >> >> How can I run 'l4test' successful?<br>
>> >> >> Regards,<br>
>> >> >> --<br>
>> >> >> View this message in context:<br>
>> >> >><br>
>> >><br>
>> <a href="http://n2.nabble.com/Problem-with-running-%27l4test%27-tp1607028p1607028.html" target="_blank">http://n2.nabble.com/Problem-with-running-%27l4test%27-tp1607028p1607028.html</a><br>
>> >> >> Sent from the OKL4 Community Forum mailing list archive at<br>
>> Nabble.com.<br>
>> >> ><br>
>> >> >> _______________________________________________<br>
>> >> >> Developer mailing list<br>
>> >> >> <a href="mailto:Developer@okl4.org">Developer@okl4.org</a><br>
>> >> >> <a href="https://lists.okl4.org/mailman/listinfo/developer" target="_blank">https://lists.okl4.org/mailman/listinfo/developer</a><br>
>> >> ><br>
>> >> ><br>
>> >> > --<br>
>> >> ><br>
>> >> ><br>
>> >> > _______________________________________________<br>
>> >> > Developer mailing list<br>
>> >> > <a href="mailto:Developer@okl4.org">Developer@okl4.org</a><br>
>> >> > <a href="https://lists.okl4.org/mailman/listinfo/developer" target="_blank">https://lists.okl4.org/mailman/listinfo/developer</a><br>
>> >> ><br>
>> >> ><br>
>> >><br>
>> >> --<br>
>> >> View this message in context:<br>
>> >><br>
>> <a href="http://n2.nabble.com/Problem-with-running-%27l4test%27-tp1607028p1607438.html" target="_blank">http://n2.nabble.com/Problem-with-running-%27l4test%27-tp1607028p1607438.html</a><br>
>> >> Sent from the OKL4 Community Forum mailing list archive at Nabble.com.<br>
>> >><br>
>> >><br>
>> >> _______________________________________________<br>
>> >> Developer mailing list<br>
>> >> <a href="mailto:Developer@okl4.org">Developer@okl4.org</a><br>
>> >> <a href="https://lists.okl4.org/mailman/listinfo/developer" target="_blank">https://lists.okl4.org/mailman/listinfo/developer</a><br>
>> >><br>
>> ><br>
>> > --<br>
>> ><br>
>> ><br>
>> > _______________________________________________<br>
>> > Developer mailing list<br>
>> > <a href="mailto:Developer@okl4.org">Developer@okl4.org</a><br>
>> > <a href="https://lists.okl4.org/mailman/listinfo/developer" target="_blank">https://lists.okl4.org/mailman/listinfo/developer</a><br>
>> ><br>
>> ><br>
>><br>
>> --<br>
>> View this message in context:<br>
>> <a href="http://n2.nabble.com/Problem-with-running-%27l4test%27-tp1607028p1611958.html" target="_blank">http://n2.nabble.com/Problem-with-running-%27l4test%27-tp1607028p1611958.html</a><br>
>> Sent from the OKL4 Community Forum mailing list archive at Nabble.com.<br>
>><br>
>><br>
>> _______________________________________________<br>
>> Developer mailing list<br>
>> <a href="mailto:Developer@okl4.org">Developer@okl4.org</a><br>
>> <a href="https://lists.okl4.org/mailman/listinfo/developer" target="_blank">https://lists.okl4.org/mailman/listinfo/developer</a><br>
>><br>
><br>
> _______________________________________________<br>
> Developer mailing list<br>
> <a href="mailto:Developer@okl4.org">Developer@okl4.org</a><br>
> <a href="https://lists.okl4.org/mailman/listinfo/developer" target="_blank">https://lists.okl4.org/mailman/listinfo/developer</a><br>
><br>
><br>
<br>
--<br>
</div></div>View this message in context: <a href="http://n2.nabble.com/Problem-with-running-%27l4test%27-tp1607028p1614822.html" target="_blank">http://n2.nabble.com/Problem-with-running-%27l4test%27-tp1607028p1614822.html</a><br>
<div><div></div><div class="Wj3C7c">Sent from the OKL4 Community Forum mailing list archive at Nabble.com.<br>
<br>
<br>
_______________________________________________<br>
Developer mailing list<br>
<a href="mailto:Developer@okl4.org">Developer@okl4.org</a><br>
<a href="https://lists.okl4.org/mailman/listinfo/developer" target="_blank">https://lists.okl4.org/mailman/listinfo/developer</a><br>
</div></div></blockquote></div><br>