[okl4-developer] OKL4 on ARM926ej-s board

[akshay st]

Hi,
We did some work on 2.1
As far i understand, u need to port L4 microkernel to your board, i.e. interrupts,timer,serial etc...,
ARMV5 is already is supported in 2.1 ,shd be supported in 3.0 i guess. 
After that you can build and run your example applications on top of that. 
 
Warm Regards,
Akshay

--- On Wed, 20/1/10, Andreas Ostermann <andreas.ostermann.11 at googlemail.com> wrote:


From: Andreas Ostermann <andreas.ostermann.11 at googlemail.com>
Subject: [okl4-developer] OKL4 on ARM926ej-s board
To: developer at okl4.org
Date: Wednesday, 20 January, 2010, 9:10 PM


Hello everyone,

I would like to try the OKL4 on my board. Currently there is a u-boot which starts a Linux, the rootfs lies on a second partition on the Flash.

For testing, I just want to replace my Kernel with the OK:Linux and add the OKL4.

However, I read most of the manuals, and I don't get it.

I need a to create a uImage, so u-boot can load it from the network. And I have of course tell the OKL4 how the memory looks like. Additionall the settings of my SoC.... e.g. serial port... 

I downloaded the sdk-arm926ejs-3.0.tar.gz, do I still need the okl4_3.0.tar.gz? For the first Version I would be happy if the singlecell example would run on my board...

So, as already mentioned, I don't get it.

Can anybody point me to the right direction,

Thanks,

Andreas


-----Inline Attachment Follows-----


_______________________________________________
Developer mailing list
Developer at okl4.org
https://lists.okl4.org/mailman/listinfo/developer



      The INTERNET now has a personality. YOURS! See your Yahoo! Homepage. http://in.yahoo.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.okl4.org/pipermail/developer/attachments/20100121/1b0a3789/attachment.htm