[okl4-developer] OKL4 on ARM926ej-s board

[Andreas Ostermann]

Hello everyone,

I would like to try the OKL4 on my board. Currently there is a u-boot which
starts a Linux, the rootfs lies on a second partition on the Flash.

For testing, I just want to replace my Kernel with the OK:Linux and add the
OKL4.

However, I read most of the manuals, and I don't get it.

I need a to create a uImage, so u-boot can load it from the network. And I
have of course tell the OKL4 how the memory looks like. Additionall the
settings of my SoC.... e.g. serial port...

I downloaded the
sdk-arm926ejs-3.0.tar.gz<http://wiki.ok-labs.com/downloads/release-3.0/sdk-arm926ejs-3.0.tar.gz>,
do I still need the
okl4_3.0.tar.gz<http://www.ok-labs.com/registrations/softwareDownload>?
For the first Version I would be happy if the singlecell example would run
on my board...

So, as already mentioned, I don't get it.

Can anybody point me to the right direction,

Thanks,

Andreas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.okl4.org/pipermail/developer/attachments/20100120/c72ef92c/attachment.htm