[okl4-developer] gumstix ethernet smc911x

[Harald Roeck]

got the ethernet driver in wombat working. attached are two patch
files. a patch for OKL4 to get the additional registers of the PXA27x
cpus (i.e. gumstix verdex board). the second patch adds pxa27x support
and the smc911x driver to wombat.

regards,
-Harald

On Wed, Apr 15, 2009 at 3:22 PM, Harald Roeck <hroeck at gmail.com> wrote:
> Is it possible do get the new gumstix ethernet module working inside
> oklinux? Running linux native we used the smc911x driver. I tried to
> port the gumstix smc911x driver to oklinux and got it to compile and
> boot (see attached patch file). however, the driver is not getting any
> interrupts. I noticed the following warning when oklinux boots:
>
> No IRQF_TRIGGER set_type function for IRQ 66 (iguana)
>
> The eth0 interrupt is registered at IRQ 66, see:
> / # cat /proc/interrupts
>  22:        178          iguana  FFUART
>  25:          0          iguana  DMA
>  27:        757          iguana  ost1
>  52:          0          iguana  cell
>  66:          0          iguana  eth0
>
> fyi: I'm running OKL4 3.0 on a gumstix verdex with the netwifimicrosd
> daughter board.
>
> thanks,
> -Harald
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wombat_pxa270_smc911x.patch
Type: text/x-diff
Size: 40404 bytes
Desc: not available
Url : http://lists.okl4.org/pipermail/developer/attachments/20090422/94438abf/attachment-0002.patch 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: okl4_pxa270_platform.patch
Type: text/x-diff
Size: 5178 bytes
Desc: not available
Url : http://lists.okl4.org/pipermail/developer/attachments/20090422/94438abf/attachment-0003.patch