[okl4-developer] gumstix ethernet smc911x

[Harald Roeck]

Is it possible do get the new gumstix ethernet module working inside
oklinux? Running linux native we used the smc911x driver. I tried to
port the gumstix smc911x driver to oklinux and got it to compile and
boot (see attached patch file). however, the driver is not getting any
interrupts. I noticed the following warning when oklinux boots:

No IRQF_TRIGGER set_type function for IRQ 66 (iguana)

The eth0 interrupt is registered at IRQ 66, see:
/ # cat /proc/interrupts
 22:        178          iguana  FFUART
 25:          0          iguana  DMA
 27:        757          iguana  ost1
 52:          0          iguana  cell
 66:          0          iguana  eth0

fyi: I'm running OKL4 3.0 on a gumstix verdex with the netwifimicrosd
daughter board.

thanks,
-Harald
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fix-smc911.patch
Type: text/x-diff
Size: 14537 bytes
Desc: not available
Url : http://lists.okl4.org/pipermail/developer/attachments/20090415/5fa98d3a/attachment.patch