[okl4-developer] build-system-problems with okl4 3.0 and gta01

[Dennis Gessner]

Hi,

I can confirm - the patch really works. Now it is again possible to use
wombat with he gta01 device!

Thanks a lot!

Best regards
Dennis

Geoffrey Lee schrieb:
> On Wed, Nov 19, 2008 at 03:00:25PM +0100, Dennis Gessner wrote:
>> Hi,
>>
> 
> There is an issue when using enable_fastpaths=False on the 2.1-based
> releases, which can be triggered by running OK Linux on OKL4 with
> fastpaths off.  I've posted a patch to Dennis, which is reproduced
> here.
> 
>         -gl
> 
>> because of an bug inside okl4 2.1.1, this morning I had to switch to
>> okl4 3.0. Now I have some problems with the build system/sdk.
>>
>> Can anyone just try this out - maybe (I'm almost sure) this is my own
>> fault and I would like to know what I am doing wrong.
>>
>> I would like to use okl4 3.0 with the gta01 device, which is based on
>> the ARM920 core (ARMv4).
>>
>> I tried the following:
>>
>> I've downloaded the precompiled cross-compiler
>> arm-linux-gnueabi-4.2.4.tar.gz and installed it into my system.
>>
>> - Download the complete sourcecode of okl4.
>> - tools/build.py machine=gta01 project=iguana wombat=true debug_trace=5
>>
>> -> caused an error:
>> ./okl4_3.0/linux/rootfs-2.6.24-v2/SConscript:32 Error: name
>> 'oklinux_tests' is not defined
>>
>> so I changed the command to (regarding some posts on the mailinglist to
>> eliminate some other errors):
>> - tools/build.py machine=gta01 project=linux wombat=true
>> enable_fastpaths=False debug_trace=5 PYFREEZE=False
>>
>> -> caused an error:
>> scons: Reading SConscript files ...
>> OK Linux library dependencies: ['mutex', 'l4e', 'l4', 'gcc',
>> 'circular_buffer', 'oklinux', 'atomic_ops', 'okl4']
>> build okl4fs? False
>> mutex type user
>> disk_size is 5600
>> scons: done reading SConscript files.
>> scons: Building targets ...
>> [CXX ] build/pistachio/l4kernel/object/src/asid.o
>> Assembler messages:
>> Fatal error: Invalid -march= option: `armv4t'
>> scons: *** [build/pistachio/l4kernel/object/src/asid.o] Error 1
>> scons: building terminated because of errors.
>>
>> so I thought... ok, maybe I should follow the mailinglist and really use
>> the sdk :-) ...
>>
>> - Download ARM920t 3.0
>> - Followed the instructions inside the tutorials "SDK Tutorial: Hello
>> World" and some parts of the mailinglist
>> - copied ./examples/singlecell to my working directory
>> - export OKL4_SDK_ROOT=...
>> - make
>>
>> -> caused an error:
>> make -C hello KERNEL=micro BUILD=debug
>> make[1]: Entering directory `./new/work/hello'
>> cp hello.xml.in build.micro-debug/bin/hello.xml
>> arm-unknown-linux-gnueabi-gcc -O2 --std=gnu99 -Wall -Wstrict-prototypes
>> -Wmissing-prototypes -Wnested-externs -Wmissing-declarations
>> -Wredundant-decls -Wundef -Wpointer-arith -Wno-nonnull -Werror
>> -march=armv4t -mtune=arm920t -O2 -nostdlib -nostdinc -g  -Iinclude
>> -I./new/sdk/okl4/arm920t/micro-debug/include  -c src/hello.c -o
>> build.micro-debug/src/hello.o
>> Assembler messages:
>> Fatal error: Invalid -march= option: `armv4t'
>> make[1]: *** [build.micro-debug/src/hello.o] error 1
>> make[1]: Leaving directory `./new/work/hello'
>> make: *** [hello/build.micro-debug/bin/hello.xml] error 2
>>
>> ----
>>
>> What else can I do to get okl4 3.0 working?
>>
>> Another small question:
>> Why isn't there a linux/kernel-2.6.24-v2/l4linux_config_gta01_cell ? As
>> little workaround (because of he wants to have this file), I just copied
>> the l4linux_config_gta01 over it ...
>>
>> Best regards,
>> Dennis
>>