[okl4-developer] Need help in compiling

[neohtm]

Thank for reply.

 

My okl4 system do have a serial port. I'm connecting the serial cable to my
laptop and since my laptop don't have any serial port available, I have to
use a USB converter as a replacement.

 

--Neohtm

 

From: Jorge Torres [mailto:jorge.torres.maldonado at gmail.com] 
Sent: Monday, March 24, 2008 4:41 AM
To: neohtm
Cc: Nelson Tam; developer at okl4.org
Subject: Re: [okl4-developer] Need help in compiling

 

Hi,

I dont understand, your okl4 system does not have a serial port, so you
have conected a usb to rs232 converter to your okl4 system usb port? if this
is the case, then, you might need a usb driver for your OKL4,

All the best,

Jorge

On Fri, Mar 21, 2008 at 4:08 AM, neohtm <neohtm at gmail.com> wrote:

Yes....the Putty is listening to the serial port..i also had set the serial
parameters like you show..
But it is still the same...terminal didn't show anything....


-----Original Message-----
From: Nelson Tam [mailto:nelson at ok-labs.com]

Sent: Friday, March 21, 2008 4:07 PM
To: neohtm
Cc: developer at okl4.org
Subject: Re: [okl4-developer] Need help in compiling

Hi,

On 21/03/2008, at 2:15 PM, neohtm wrote:
> I'd connected the USB-RS232 converter from the system to my laptop.
> Then I
> had opened the serial terminal the Putty in Windows from my laptop.
> But the
> system seems still the same...is there anything I forget to do??
> Sorry for
> these kind of newbie question.


Is Putty listening in to the serial port with the correct parameters?

Please read Section 3.7 of the Putty documentation:

http://the.earth.li/~sgtatham/putty/0.60/puttydoc.txt
<http://the.earth.li/%7Esgtatham/putty/0.60/puttydoc.txt> 

The serial parameters are:

Baud rate (Speed): 115200
Data bits:  8
Parity bit: none
Stop bits:  1
Flow control: none

Serial line should correspond to the USB port your adaptor is
connected to.  See if your Windows' "Hardware Profile" control panel
helps you there (don't exactly remember what it's called, but it's
been a while since I've used Windows... :)
--
(nt)

Nelson Tam
nelson at ok-labs.com




_______________________________________________
Developer mailing list
Developer at okl4.org
https://lists.okl4.org/mailman/listinfo/developer

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.okl4.org/pipermail/developer/attachments/20080324/f469e866/attachment.htm