[okl4-developer] gumstix network device problems

[j_hieb at insightbb.com]

I have compiled okl4 for the gumstix and am able to successfully boot into wombat.

However, the network device is not found.  specifically in the boot sequence:

smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico at cam.org>
request_irq: requested invalid irq 66 >= NR_IRQS 64smc91x: not found (-22).
smc91x: probe of smc91x0 failed with error -22

I think there are only 60 or 65 IRQ lines available ?? 
Normal gumstix seems to be using the same driver (smc91x.c) and using irq 25.

Is iguana interfering with interrupts? 

any suggestions? or any one have the same problem?

I also included the entire boot log below if it helps

jeff 



vbase is 0x1302000, vend is 0xcfffffff
addr is 0x1302000, vbase is 0x1302000
PXA25X OS Timer driver starting...
PXA25X wrap handler installed
Using FFUART.
Backed PXA serial
                 Linux version 2.6.10-arm (sysjeff at localhost.localdomain) (gcc version 3.4.4) #1 Fri Sep 7 23:54:02 EDT 2007
Kernel memory ranges:
  0: 0x02000000-0x02fff000 (4095 pages)
  total 4095 pages
Built 4 zonelists
Kernel command line: igms_name=ramdisk root=/dev/igms0
PID hash table entries: 128 (order: 7, 2048 bytes)
Instance: 0x012bea00 -- server: 264001 objref: 12a6000
l4e_console initialised
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 16084k/16400k available (1249k kernel code, 204k reserved, 242k data, 60k init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
ptrace_break_init unimplemented
NET: Registered protocol family 16
gumstix_init: Initialising board...
pxa_init()
get_clk_frequency_khz(1)
Done
igvfb alloc = 012c0000
fb0: Virtual frame buffer device, using 75K of video memory
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico at cam.org>
request_irq: requested invalid irq 66 >= NR_IRQS 64smc91x: not found (-22).
smc91x: probe of smc91x0 failed with error -22
elevator: using anticipatory as default io scheduler
 igms0: unknown partition table
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
VFS: Mounted root (ext2 filesystem) readonly.
Linux user startup!
Mounted proc on /proc
Mounted sysfs on /sys
Mounted devpts on /dev/pts



 Jeffrey L. Hieb

Doctoral Candidate
Computer Science and Computer Engineering
J. B. Speed School of Engineering
University of Louisville

j_hieb at insightbb.com
jlhieb01 at louisville.edu


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.okl4.org/pipermail/developer/attachments/20070908/f485f365/attachment.htm