No subject

-----Original Message-----
From: Hal Ashburner [mailto:hala at ok-labs.com]=20
Sent: Friday, August 03, 2007 3:57 PM
To: Cho Myongik-W21498
Cc: developer
Subject: RE: [okl4-developer] FW: MSM6800_L4 build error with NICTA S/W

On Fri, 2007-08-03 at 14:45 +0800, Cho Myongik-W21498 wrote:
> Thanks for your reply.
>=20
> I have installed Scons tools in my VMWare fedora 7.0 linux system.
>=20
> When I run with your recommendation , I have inputed like this , but=20
> it failes
>=20
> w21498 at w21498-04:/home/w21498/l4/platform 128 %=20
> w21498 at w21498-04:/home/w21498/l4/platform 128 %=20
> w21498 at w21498-04:/home/w21498/l4/platform 128 %=20
> w21498 at w21498-04:/home/w21498/l4/platform 128 % ls
> Linux.SConstruct  diffs   libstd      pistachio          tools
> SConstruct        iguana  licensed    release_notes.txt  wombat
> apps              libs    linux_apps  test
> w21498 at w21498-04:/home/w21498/l4/platform 129 %=20
> w21498 at w21498-04:/home/w21498/l4/platform 129 %=20
> w21498 at w21498-04:/home/w21498/l4/platform 129 %=20
> w21498 at w21498-04:/home/w21498/l4/platform 129 % ./tools/build.py=20
> Unmatched ".
> w21498 at w21498-04:/home/w21498/l4/platform 130 %
>=20

Did you try the full build command?
./tools/build.py machine=3Dgumstix project=3Diguana wombat=3DTrue =
simulate
verbose_str=3DTrue

[MICHO] Yes , it has same error.

I've added verbose_str=3DTrue to the end there so you can see exactly =
what
is going on.

> You mean I need to install Cross-compiler ?
Yes you will need cross compilers installed to build for the arm
architecture.=20

[MICHO] It means before running scons or build.py , cross-compiler
should be installed.=20
              If yes , I have downloaded in my local directly
(crosstool-0.43) , but I do not know how to install it.
             Please help me how to do this.=20

--
Kind regards,
Hal Ashburner