[okl4-developer] error when simulation

[Jorge Torres]

HI kashin,

gcc should be 3.3

On 8/23/07, kashin Lin <kashin08 at gmail.com> wrote:
>
>
>
> 2007/8/23, Hal Ashburner <hala at ok-labs.com>:
> >
> > On Thu, 2007-08-23 at 13:31 +0800, kashin Lin wrote:
> > > Hi,
> > >
> > > after i try to build okl4 (./tools/build.py machine=gumstix
> > > project=iguana wombat=True simulate)
> > > , i got some error message when simulation:
> > >
> > >
> > ===================================================================================
> > > make: Leaving directory
> > > `/home/kashin08/OKL4/okl4_release_1.4.1.1/linux/kernel'
> > > [PHYS] build/iguana/wombat/vmlinux.physaddresses
> > > [PHYS] build/iguana/bin/bootinfo.physaddresses
> > > [SIM ] build/image.sim
> > > arch: arm
> > > cpu info: xscale, pxa25x, 69052100, fffffff0, 2
> > > mach info: name pxa_lubbock, mach_init addr 0x805f300
> >
> > Hi Kashin,
> > For this line, my simulation logged:
> >
> > cpu info: xscale, pxa25x, 69052100, fffffff0, 2
> > mach info: name pxa_lubbock, mach_init addr 0x8060240
> >
> > Those two mach_init addr values probably ought to be the same for you as
> >
> > it is for me, I'm not sure why they aren't just yet.
> >
> >
> > > SKYEYE: use xscale mmu ops
> > >
> > > OKL4 - (provider: Open Kernel Labs) built on Aug 23 2007 12:48:33
> > > using gcc version 3.4.4 .
> > > init_spaceids:125: Init spaceids 256 spaces
> > >
> > >  *****************************************
> > >  *  Iguana system, Copyright 1996-2006   *
> > >  *  ERTOS - National ICT Australia       *
> > >  *****************************************
> > >
> > > iguana/server/src/bootinfo.c:262 bi_execute: Boot Info header not
> > > found (found 0x0 @ 0x01300000)
> > > --- KD# User: PANIC: Bootinfo did not initialise correctly ---
> > > >
> > >
> > >
> > ======================================================================================
> >
> > > i use toolchain & simulator from NICTA's prebuilt binaries.
> > > how to fix it?
> >
> >
> > The first thing to try is to delete the build directory and re-build.
>
>
> it still doesn't work.
>
> If this doesn't work then we need to work out which part of your build
> > environment is causing some kind of incompatibility.
> > If you can list the relevant details,
> > python version ($ python -V)
> > gcc version     ($ arm-linux_gcc -v)
> > skyeye ($ skyeye -h)
> > Check your PATH variable that the correct versions of the various tools
> > are in fact being picked up.
> > Anything else you can think of that might be relevant would also be
> > appreciated if you can report that.
>
>
> python version : Python 2.5.1
>
> gcc version : 3.4.4
> skyeye : SkyEye -V1.2
> i download those in
> http://www.ertos.nicta.com.au/software/prebuilt/binaries.pml
>
> and okl4_release_1.4.1.1 from : http://portal.ok-labs.com/
>
>
>
> --
> > Kind regards,
> > Hal Ashburner
>
>
> ========================================================
>
> Hi Kaskin,
> >
> > In addition to what Hal said, I'd pay particular attention to the
> > version of skyeye since versions prior to 2.2 could produce the above
> > error.
>
>
> the version i used is v1.2.1 from NICTA site.
> so the skyeye version is the cause of this fail?
>
> If that's not the version available on the NICTA site, I'll have to see
> > what I can do to fix it.
> >
> > Malcolm
> >
>
>
> _______________________________________________
> Developer mailing list
> Developer at okl4.org
> https://lists.okl4.org/mailman/listinfo/developer
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.okl4.org/pipermail/developer/attachments/20070823/4e686588/attachment-0001.htm